Track system · HO scale
Piko HO hollow-profile track (GDR): track pieces, radii and turnouts
Piko HO hollow-profile track (GDR) is a two-rail track system without roadbed for HO scale. The system is historic and no longer made.
The Trackplanner catalogue lists 22 pieces: 15 straights, 6 curves and 1 crossing. The curves come in 2 radii from 380 to 440 mm.
Key facts
| Scale | HO scale |
|---|---|
| Rail system | two-rail |
| Roadbed | no roadbed |
| Status | historic — no longer made |
| Turnout motor | none — the system offers none |
| Pieces in the catalogue | 22 |
| Radii | 2 · 380–440 mm |
| Straight lengths | 59 · 67 · 107 · 118 · 177 mm |
Pieces by type
| Type | Count |
|---|---|
| Straights | 15 |
| Curves | 6 |
| Crossings | 1 |
Radii
| Radius | Angle | Articles |
|---|---|---|
| 380 mm | 22.5° · 15° · 7.5° | 5/6813 · 5/6814 · 5/6815 |
| 440 mm | 22.5° · 15° · 7.5° | 5/6810 · 5/6811 · 5/6812 |
Helix kits for this system
These kits have a radius that matches one of the system’s curves (within 5 mm). The helix assistant in Trackplanner checks whether the clearance is enough for your rolling stock.
| Kit | Fits | Gradient | Clearance | Buy |
|---|---|---|---|---|
| Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, threaded rods with plastic holders (Märklin C-Gleise R2) | for 44.0 cm | 3.07 % | — | From the maker |
| Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, laser-cut plywood supports (Märklin C-Gleise R2) | for 44.0 cm | 3.07 % | — | From the maker |
| Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, laser-cut plywood supports (Märklin C-Gleise R1) | for 44.0 cm | 2.35 % | — | From the maker |
| Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, M6 threaded-rod supports (Märklin C-Gleise R2) | for 44.0 cm | 3.26 % | — | From the maker |
| Gleiswendelshop (Tobias Fischer) H0 helix, R2, single track (2–8 turns) | for 44.0 cm | 3.62 % | — | From the maker |
Turnouts and crossings
| Article | Type | Angle |
|---|---|---|
| 5/6852 | Crossing | — |
Still missing
We have no manufacturer dimensions for these pieces. We’d rather not guess, because then your plan wouldn’t fit together when you build it.
- Turnouts (5/6854, 5/6855, 5/6857, 5/6858): radius, position of the diverging end
- Double slips (5/6856): radius, position of the diverging end
- Buffer stops (5/6826): shape
Do you own one, its box or a catalogue? Send us a photo with a ruler next to it, a catalogue page or a link.
We don’t publish your photos. We only use the dimensions.
All pieces
Show all 22 pieces
| Article | Type | Dimensions |
|---|---|---|
| 5/6802 | Straight | 59 mm |
| 5/6821 | Straight | 59 mm |
| 5/6822 | Straight | 59 mm |
| 5/6823 | Straight | 59 mm |
| 5/6824 | Straight | 59 mm |
| 5/6851 | Straight | 59 mm |
| 5/6861 | Straight | 59 mm |
| 5/6864 | Straight | 59 mm |
| 5/6804 | Straight | 67 mm |
| 5/6803 | Straight | 107 mm |
| 5/6801 | Straight | 118 mm |
| 5/6827 | Straight | 118 mm |
| 5/6800 | Straight | 177 mm |
| 5/6820 | Straight | 177 mm |
| 5/6866 | Straight | 177 mm |
| 5/6813 | Curve | R 380 mm · 22.5° |
| 5/6814 | Curve | R 380 mm · 15° |
| 5/6815 | Curve | R 380 mm · 7.5° |
| 5/6810 | Curve | R 440 mm · 22.5° |
| 5/6811 | Curve | R 440 mm · 15° |
| 5/6812 | Curve | R 440 mm · 7.5° |
| 5/6852 | Crossing | — |
Dimensions in mm, angles in degrees, from the Trackplanner catalogue. Where the data does not give a value unambiguously, the field stays empty.
Changes
No changes since the change log began (16 November 2026).