Track system · HO scale

Kleinbahn H0 (Vienna, two-rail): track pieces, radii and turnouts

Kleinbahn H0 (Vienna, two-rail) is a two-rail track system without roadbed for HO scale. The system is historic and no longer made.

The Trackplanner catalogue lists 21 pieces: 10 straights and 11 curves. The curves come in 2 radii from 384 to 436.5 mm.

Key facts

ScaleHO scale
Rail systemtwo-rail
Roadbedno roadbed
Statushistoric — no longer made
Turnout motornone — the system offers none
Pieces in the catalogue21
Radii2 · 384–436.5 mm
Straight lengths44 · 50 · 56 · 100 · 200 mm

Pieces by type

TypeCount
Straights10
Curves11

Radii

Radius Angle Articles
384 mm 30° · 15° · 7.5° 611 · 612 · 613 · 614 · 633 · 636
436.5 mm 30° · 15° · 7.5° 621 · 622 · 623 · 624 · 634

Helix kits for this system

These kits have a radius that matches one of the system’s curves (within 5 mm). The helix assistant in Trackplanner checks whether the clearance is enough for your rolling stock.

Kit Fits Gradient Clearance Buy
Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, threaded rods with plastic holders (Märklin C-Gleise R2) for 43.65 cm 3.10 % — From the maker
Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, laser-cut plywood supports (Märklin C-Gleise R2) for 43.65 cm 3.10 % — From the maker
Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, laser-cut plywood supports (Märklin C-Gleise R1) for 43.65 cm 2.37 % — From the maker
Gleiswendel-Profi (HaHoTec Holztechnik) H0 helix, single track, radius 437.5 mm, M6 threaded-rod supports (Märklin C-Gleise R2) for 43.65 cm 3.28 % — From the maker
Gleiswendelshop (Tobias Fischer) H0 helix, R2, single track (2–8 turns) for 43.65 cm 3.65 % — From the maker

All helix kits →

All pieces

Show all 21 pieces
ArticleTypeDimensions
606Straight44 mm
603Straight50 mm
605Straight56 mm
602Straight100 mm
631Straight100 mm
632Straight100 mm
635Straight100 mm
638Straight100 mm
601Straight200 mm
604Straight200 mm
611CurveR 384 mm · 30°
614CurveR 384 mm · 30°
612CurveR 384 mm · 15°
633CurveR 384 mm · 15°
636CurveR 384 mm · 15°
613CurveR 384 mm · 7.5°
621CurveR 436.5 mm · 30°
624CurveR 436.5 mm · 30°
622CurveR 436.5 mm · 15°
634CurveR 436.5 mm · 15°
623CurveR 436.5 mm · 7.5°

Dimensions in mm, angles in degrees, from the Trackplanner catalogue. Where the data does not give a value unambiguously, the field stays empty.

Changes

No changes since the change log began (15 November 2026).