Track system · HOe narrow gauge (9 mm)

Roco H0e: track pieces, radii and turnouts

Roco H0e is a two-rail track system without roadbed for HOe narrow gauge (9 mm).

The Trackplanner catalogue lists 10 pieces: 2 straights, 2 curves, 2 flex tracks and 4 turnouts. The curves come in 2 radii from 261.8 to 493 mm.

Key facts

ScaleHOe narrow gauge (9 mm)
Rail systemtwo-rail
Roadbedno roadbed
Statuscurrent — in production and in the shops
Turnout motorsold separately: drive 32418 (left) / 32419 (right)
Pieces in the catalogue10
Radii2 · 261.8–493 mm
Straight lengths47.9 · 134.4 mm
Turnout angles15° · 24°

Pieces by type

TypeCount
Straights2
Curves2
Flex tracks2
Turnouts4

Radii

Radius Angle Articles
261.8 mm 30° 32204
493 mm 15° 32205

Helix kits for this system

These kits have a radius that matches one of the system’s curves (within 5 mm). The helix assistant in Trackplanner checks whether the clearance is enough for your rolling stock.

Kit Fits Gradient Clearance Buy
Gleiswendelshop (Tobias Fischer) H0 helix, R3, single track (2–8 turns) for 49.3 cm 3.23 % — From the maker

All helix kits →

Turnouts and crossings

ArticleTypeAngle
32401 Turnout left 24°
32403 Turnout right 24°
32409 Turnout left 15°
32411 Turnout right 15°

All pieces

ArticleTypeDimensions
32203Straight47.9 mm
32202Straight134.4 mm
32204CurveR 261.8 mm · 30°
32205CurveR 493 mm · 15°
32200Flex track730 mm
32201Flex track730 mm
32401Turnout left24°
32403Turnout right24°
32409Turnout left15°
32411Turnout right15°

Dimensions in mm, angles in degrees, from the Trackplanner catalogue. Where the data does not give a value unambiguously, the field stays empty.

Changes

8 October 2026

  • 32200 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32201 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32202 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32203 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32204 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32205 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32401 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32403 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32409 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

  • 32411 Appearance

    Rails brought in line with the prototype: placed so the gap between them is exactly the track gauge. Connectors and track dimensions are unchanged.

7 October 2026

  • 32401 Type corrected

    The turnout has a factory-fitted drive. The parts list no longer adds a separate turnout drive for it; the control panel and decoders still count it. Source

  • 32403 Type corrected

    The turnout has a factory-fitted drive. The parts list no longer adds a separate turnout drive for it; the control panel and decoders still count it. Source

5 October 2026

  • 32401 Appearance

    End sleeper added at the joint (joint marker).

  • 32403 Appearance

    End sleeper added at the joint (joint marker).

  • 32409 Appearance

    End sleeper added at the joint (joint marker).

  • 32411 Appearance

    End sleeper added at the joint (joint marker).

  • 32401 Appearance

    Sleeper layout tidied: duplicate sleepers of overlapping routes removed, long turnout timbers, gaps closed.

  • 32403 Appearance

    Sleeper layout tidied: duplicate sleepers of overlapping routes removed, long turnout timbers, gaps closed.

  • 32409 Appearance

    Sleeper layout tidied: duplicate sleepers of overlapping routes removed, long turnout timbers, gaps closed.

  • 32411 Appearance

    Sleeper layout tidied: duplicate sleepers of overlapping routes removed, long turnout timbers, gaps closed.

3 October 2026

  • 32200 Appearance

    The flex track had two rails but no sleepers. It now has sleepers (16,3 mm long, 7,1 mm apart).

  • 32201 Appearance

    The flex track had two rails but no sleepers. It now has sleepers (16,3 mm long, 7,1 mm apart).

  • 32202 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32203 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32204 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32205 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32401 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32403 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32409 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).

  • 32411 Appearance

    The piece was drawn as a centreline only. It now has two rails 9 mm apart and sleepers (16,3 mm long, 7,1 mm apart).