Scenery in the clearance
Work in progress: This section is still a work in progress — content is being added and revised continuously.
What is checked? If a signal, a mast, a building or another fixed scenery item reaches into the clearance of a track, the plan check reports the spot. It measures the 3D model of the item and checks its height against the shape of the NEM 102 profile: just above the rail top the profile is narrower, and at the top it tapers in. In curves the rule also checks against the body of your longest car, which swings out to the side there. Items that belong at or above the track are not checked: platforms, buffer stops, level crossings, bridges, tunnel portals, engine sheds, cranes, loading ramps, figures and vehicles. On a catenary mast only the mast counts; the bracket and contact wire may reach over the track. Signals and signal boards, like all functional elements, may reach into the lower part of the profile (NEM 102), so a dwarf signal reports nothing.
Why does it matter? A signal that stands a few millimetres too close to the track often shows up only when the first long car knocks it over. In a curve the car ends swing outwards and the middle of the car swings inwards, so a mast that fits along straight track can suddenly be in the way.
How to fix it: Move the item away from the track, at least by the depth the hint states. If it stands in a curve, a spot along straight track also helps. If something stands there on purpose, such as a shed the track runs into, ignore the hint.
Numbers & defaults: NEM 102 profile in H0: 42 mm wide up to 11 mm above the rail top, 48 mm up to 45 mm, 32 mm at the top at 59 mm; with catenary it reaches 65 mm. Tolerance 0.5 mm. In curves, as soon as a train with car lengths is in the plan, the car body counts: half the width of a UIC coach (H0 16 mm), plus the NEM 103 swing-out (H0, R 360 mm, 264 mm car: about 12 mm on the outside, about 13 mm on the inside) and 2 mm of margin, between the car floor and the roof (H0 13 to 47 mm above the rail top). A hit there is a warning, one in the profile an error. If your plan has its own envelope, it applies as a rectangle.